MAXINCOM MUC1004 Administrator's Manual page 22

1) Route Table
The current route rules of PBX.
2) Static Route Rules
You can add new static route rules here.
Table 3.4.6 Description of Static Routing
Parameters
Destination The destination network to be accessed to by PBX.
IP Address
Subnet Mask Specify the destination network portion.
Gateway Define which gateway PBX will go through when access to the
destination network.
Metric The cost of a route is calculated by using what are called
routing metric. Routing metrics are assigned to routes by
routing protocols to provide measurable statistic which can be
used to judge how useful (how low cost) a route is.
Interface Define which internet port to go through.
Http://www.maxincom.com
MUC1004/2008/2016 Administrator guide
Figure 3.4.6 Static Routing Table
Figure 3.4.6a Static Routing Rules
Description
22 / 112