MAXINCOM MUC1004 Administrator's Manual page 29

Parameters
IP Trunk Add remote IP of Softswitch, SIP server which will send call
traffics to gateway.
Trunk Name It describes the trunk for the ease of identification.
Type Choose the type of this trunk, SIP or IAX
Outbound Caller ID for calls placed on out this trunk
Caller ID
Hostname/IP Service provider‟s hostname or IP address,5060 is the
Address standard port number used by SIP protocol. Don‟t change
this part if it is not required.
Transport This will be the transport method used by the SIP Trunk. This
method is given by the SIP trunk provider. The options are
UDP (default) or TCP or TLS.
Http://www.maxincom.com
MUC1004/2008/2016 Administrator guide
Figure 3.5.2b Add Bulk Dod
Table 3.5.2 Description of IP Trunk
Description
29 / 112