Arp Configuration - MAXINCOM MUC1004 Administrator's Manual

Subnet Mask Set the Subnet Mask for PBX VLAN over LAN.
Gateway Set the Default Gateway for PBX VLAN over LAN

3.4.3 ARP Configuration

The ARP function is mainly used to query and add the map of IP and MAC.
There are static or dynamic ARP entries.
Like other routers, the gateway can automatically find the network device on
the same segment. But, sometimes you don't want to use this automatic
mapping, you'd rather have fixed (static) associations between an IP address
and a MAC address. Gateway provides you the ability to add static ARP entries
to:
● Protect your network against ARP spoofing
● Prevent network confusion as a result of misconfigured network device
Click "Dynamic ARP" to check ARP buffer
Http://www.maxincom.com
MUC1004/2008/2016 Administrator guide
Figure 3.4.3a Dynamic ARP
19 / 112