MAXINCOM MUC1004 Administrator's Manual page 61

N: Any Digit from 2-9
[12345-9]: Any digit in the brackets (in this example, 1, 2,
3, 4, 5, 6, 7, 8, 9)
The "." Character will match any remaining digits. For
example, "9011." will match any phone number that starts
with "9011", excluding "9011" itself.
The "!" will match none remaining digits, and causes the
matching process to complete as soon as it can be
determined that no other matches are possible.
Example 1: NXXXXXX will match any 7-digit phone
number.
Example 2: 1NXXNXXXXX will match a phone number
starting with a 1, followed by a 3-digit area code, and then
6-digit number.
Extension
Define the extension for DID number. This field is only valid
when you use BRI, SIP, SPS or SPX trunk for this inbound
router. You can only input number and "-" in this field and
the format can be xxx or xxx-xxx. The count of the number
must be only one or equal to the count of the DID number.
Caller ID
Define the Caller ID Number to be matched on incoming
Number
calls. Leave this field blank to match any or no DID info.
You can also use a pattern match (e.g. 2[345]X) to match a
range of numbers.
The following patterns may be used:
X: Any Digit from 0-9
Z: Any Digit from 1-9
N: Any Digit from 2-9
[12345-9]: Any digit in the brackets (in this example, 1, 2,
3, 4, 5, 6, 7, 8, 9)
The "." Character will match any remaining digits. For
example, "9011." will match any phone number that starts
with "9011", excluding "9011" itself.
The "!" will match none remaining digits, and causes the
matching process to complete as soon as it can be
determined that no other matches are possible.
Example 1: NXXXXXX will match any 7 digits phone
number.
Example 2: 1NXXNXXXXX will match a phone number
Http://www.maxincom.com
MUC1004/2008/2016 Administrator guide
61 / 112