MAXINCOM MUC1004 Administrator's Manual page 25

Table 3.5.1 Description of Analog Trunk
Parameters
Trunk Name
Rxgain
Answer on Polarity
Detection
CID Detection
CID Start
Http://www.maxincom.com
MUC1004/2008/2016 Administrator guide
Figure 3.5.1a Analog Trunks Edit
A unique label used to identify this trunk when listed in
outbound rules, incoming rules, etc.E.g. "pstn113".
Used to modify the volume level of this trunk. Normally,
this setting does not need to be changed.
Use a polarity reversal to mark when a outgoing call is
answered by the remote party
For FXO trunks, this option forces PBX to look for Caller ID
on incoming calls.
This option allows you to define the start of a Caller ID
signal:
Ring: Start when a ring is received (Caller ID Signaling:
Description
25 / 112