MAXINCOM MUC1004 Administrator's Manual page 38

Table 3.6.1.1d Description of FXS Extensions Other
Parameters
PBX allows extension to monitor/barge in other
Spy Settings
conversation. Once this feature is enabled, the extension has
the ability to monitor/barge in other calls using the feature
codes for each spy mode. Refer to "Feature Codes" section
for more information.
There are 4 spy modes available:
spy modes
 General spy: you have the permission to use the
modes.
 Quiet spy: you can only hear the call, but can't talk.
 Whisper spy: you can hear the call, and can talk with the
monitored extension.
 Barge spy: you can hear the call and talk with them both.
Flash Sets the amount of time, in milliseconds, that must pass
since the last hook-flash event received by PBX before it will
recognize a second event. If a second event occurs in less
time than defined by Hook Flash Detection, then PBX will
ignore the event. The default value of Flash is 1000ms, and it
can be configured in 1ms increments.
Web Login Extension web login setttings.
Http://www.maxincom.com
MUC1004/2008/2016 Administrator guide
Figure 3.6.1.1d Fxs Extensions Other
following 3
Description
38 / 112