Program 700 - Logo Description Programming - Sam4s ER-390M Operation And Program Manual

Program 700 - Logo Description Programming

Program descriptions by typing description on the alpha keyboard overlay or by entering three digit
alpha character codes. To use three digit alpha character codes you must select 'No' in system
option #30 (See "System Option Programming). Also see Descriptor Programming Methods for
Alpha Overlay and/or Descriptor Code Table.
Programming the Receipt/Check/Endorsement Message
A preamble message of up to six lines can be printed at the top of each receipt; a postamble
message of up to six lines can be printed at the bottom of each receipt: a endorsement
message of up to ten lines can be printed when a check is endorsed on an optional slip printer.
Each line can consist of up to 32 characters.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 7 0 0, press the SBTL key.
3. Refer to the chart below and enter the number that represents the line you wish to
program; press the X/TIME key.
4. If you are programming using alpha overlay,
three-character codes
5. Press the CASH key to finalize the program.
156• Program Mode Programming
7 0 0 SBTL
X X/TIME
X Message Line
st
1 1 line of Preamble
nd
2 2 line of Preamble
rd
3 3 line of Preamble
th
4 4 line of Preamble
th
5 5 line of Preamble
th
6
6 line of Preamble
st
7 1 line of Postamble
nd
8 2 line of Postamble
rd
9 3 line of Postamble
th
10 4 line of Postamble
th
11 5 line of Postamble
Type up to 32
descriptor keys
or,
Enter up to 32
CASH
X
12
13
14
15
16
17
18
19
20
21
22
SBTL
SBTL
Message Line
th
6 line of Postamble
st
1 line of Endorsement
nd
2 line of Endorsement
rd
3 line of Endorsement
th
4 line of Endorsement
th
5 line of Endorsement
th
6 line of Endorsement
th
7 line of Endorsement
th
8 line of Endorsement
th
9 line of Endorsement
th
10 line of Endorsement
ER-390M Electronic Cash Register AU