Mitsubishi FX-20P-E Operation Manual page 94

FX-20P-E Handy programming panel
Condition for transfer between the memory cassette (online mode)
PLC
RUN:×
status
• When using the EEPROM, set the write-protect switch to OFF before executing "FXRAM →
EEPROM".
• When using the EPROM, "FXRAM → EPROM" is disabled.
Condition for transfer between the HPP and the FX Series PLC (offline mode)
PLC
RUN:
status
• Set the PLC to the STOP status before executing transfer from the HPP to the memory in
the PLC.
• When using the EEPROM, set the write-protect switch to OFF before executing "HPP →
FX-EEPROM".
• When using the EPROM, "HPP → FX-EPROM" is disabled.
Valid memory
STOP:✓ RAM cassette:✓
cassette
STOP:✓ Valid memory
EEPROM
cassette:
Inbuilt memory:✓ RAM cassette:✓
Others Function 10
EPROM
cassette:
EEPROM EPROM
cassette: cassette:
10-6