Table of Contents
Advertisement
FX-20P-E Handy programming panel
• What is an operand?
Operands are devices used for operations of instructions.
For example, in the case of MOV instruction,
When entering an operand, make sure to input it in the order "[S'P] (operand)".
• Timing to specify the D (double)/P (pulse) instruction Specification of the D/P instruction is
valid if it is executed in the same order as the display (operation example 1) or if it is
executed after input of the instruction No.
Either D and P can be specified first or the operator can press the [HELP] key to display the
instruction word list, check whether D and P can be specified for the instruction, then
specify D and P .
• Restriction in programming when the FX/FX
When a RAM file register is used as an operand, only the BMOV instruction is available.
[ MOV D0 D1 ]
Operand
'
Device
Device
SP
symbol
No.
Operand
Series PLC is used
2C
Write 5
5-7
Advertisement
Table of Contents
