Program Delete Operation; Outline Of Delete Operation; Delete Of Instruction And Pointer - Mitsubishi FX-20P-E Operation Manual

FX-20P-E Handy programming panel
7.

Program Delete Operation

7.1

Outline of delete operation

Read a program, and delete an instruction, pointer or NOP .
Delete operation condition
PLC
RUN:×
status
• While the PLC is in the RUN status or while the EPROM cassette is attached, the delete
operation is disabled.
7.2

Delete of instruction and pointer

Basic operation
Read
program.
• By the operation above, the instruction in the cursor position is deleted.
As to instructions which use two or more lines such as set values of timers and counters and
operands of application instructions, when the instruction part, set value or operand is deleted,
all lines are deleted at a time.
• After the deleted position, each step No. is automatically carried down. (The display is shifted up.)
STOP:✓ Valid memory
Move the cursor.
INS/ INS/
DEL DEL
Delete function
Inbuilt memory:✓ RAM cassette:✓
GO
Program Delete Operation 7
EEPROM EPROM
cassette: cassette:×
7-1