Parameter; Outline Of Parameter Settings - Mitsubishi FX-20P-E Operation Manual

FX-20P-E Handy programming panel
10.5

Parameter

10.5.1

Outline of parameter settings

• In the online mode, set parameters to the memory in the PLC (memory cassette if it is
attached). In the offline mode, set parameters to the inbuilt HPP RAM.
• The default setting, the memory capacity, the entry code, the latch (backup against power
failure) range, file registers and the RUN terminal (only in the FX
PLC) can be set.
• Display and set parameters in the order shown below.
4 OTHER
Select the parameter
setting function.
GO
Default
setting
CLEAR
If not changing a displayed item, press the [GO] key to proceed to the next item. Press the
[CLEAR] key to return to the previous item. Press the [OTHER] key to return to the others
mode menu display.
GO GO
Memory Entry
capacity code
CLEAR CLEAR
/FX
1S
Latch range
GO
File
(M, S, C and
register
D) CLEAR
Others Function 10
/FX /FX Series
1N 2N 2NC
GO
RUN
terminal
CLEAR
Setting end GO
10-9