Buzzer Sound - Mitsubishi FX-20P-E Operation Manual

FX-20P-E Handy programming panel
10.7

Buzzer sound

• Adjust the sound volume of the buzzer issued when a key is input.
Buzzer sound adjusting condition
PLC
RUN:✓
status
Display example
In the step 2)
ONLINE MODE
1.OFFLINE MODE
2.PROGRAM CHECK
3.DATA TRANSFER
In the step 3)
6.BUZZER LEVEL
STOP:✓ Valid memory
Key operation
1)
Start up the HPP
FX
in the online or
offline mode.
2) OTHER
3) 6
4)
Inbuilt memory:✓ RAM cassette:✓
.
Select "BUZZER LEVEL".
Or place the cursor on "BUZZER LEVEL", then press the
[GO] key.
.
Adjust the sound volume in 10 steps by pressing the
cursor control keys.
As the bar is longer, the sound volume is larger.
.
Press the [OTHER] or [CLEAR] key to return to the others
mode menu display.
Others Function 10
EEPROM EPROM
cassette:✓ cassette:✓
10-19