Function List - Mitsubishi FX-20P-E Operation Manual

FX-20P-E Handy programming panel
1.4

Function list

Function
Read Reads (displays) sequence programs in PLC.
Writes sequence programs.
Write
(Key inputs in the HPP → Program memory in the PLC)
Inserts instructions into sequence programs.
Insert
(Key inputs in the HPP → Program memory in the PLC)
Deletes instructions from sequence programs.
Delete
(Key inputs in the HPP → Program memory in the PLC)
Monitor Reads (displays) the operation status in PLC.
Forcibly writes.
Test
(Keys in the HPP → Memory in the PLC)
• Changes over the program mode (online → offline).
• Checks programs.
(Checks programs saved in the PLC.)
• Transfers programs between the memory
cassette.
(Memory in the PLC ↔ Memory cassette)
• Modifies parameters. (Key inputs in the HPP →
Others Program memory in the PLC)
• Converts device Nos. in sequence programs.
(Key inputs in the HPP → Program memory in the PLC)
• Adjusts the buzzer sound volume.
(Adjusts the sound volume of the buzzer issued
when a key in the HPP is pressed.)
• Clears the latch status.
(Key inputs in the HPP → Memory inside the PLC)
Online mode Offline mode
Reads (displays) sequence programs in HPP .
Writes sequence programs.
(Key inputs in the HPP → Inbuilt HPP RAM)
Inserts instructions into sequence programs.
(Key inputs in the HPP → Inbuilt HPP RAM)
Deletes instructions from sequence programs.
(Key inputs in the HPP → Inbuilt HPP RAM)
−
−
• Changes over the program mode (offline → online).
• Checks programs.
(Checks programs saved in the PLC.)
• Transfers programs between the HPP and the FX
Series PLC. (Inbuilt HPP RAM ↔ Program
memory in the PLC)
• Modifies parameters.
(Key inputs in the HPP → Inbuilt HPP RAM)
• Converts device Nos. in sequence programs.
(Key inputs in the HPP → Inbuilt HPP RAM)
• Adjusts the buzzer sound volume.
(Adjusts the sound volume of the buzzer issued
when a key on the HPP is pressed.)
• Transfers programs between the HPP and a
module. (Inbuilt HPP RAM ↔ Module)
Notes to Users 1
1-4