Table of Contents
Advertisement
FX-20P-E Handy programming panel
10.2
Changeover of mode
• Change over the mode between online and offline.
• In the HPP , "ONLINE MODE" or "OFFLINE MODE" is displayed in accordance with the
current mode.
Mode changeover condition
PLC
RUN:✓
status
Example: Changing over from the online mode to the offline mode
Display example
In the step 2)
ONLINE MODE
1.OFFLINE MODE
2.PROGRAM CHECK
3.DATA TRANSFER
In the step 3)
1.OFFLINE MODE
EXECUTE?
OK→[GO]
NO→[CLEAR]
In the step 5)
SELECT PC TYPE
FX,FX0
FX2N,FX1N,FX1S
• When changing over from the offline mode to the online mode, the step 5) above is not
required (because the HPP automatically identifies the correct PLC model).
STOP:✓
Valid memory
Key operation
1)
Start up the HPP
FX
in the online mode.
2)
OTHER
3)
I
4)
GO
5)
6)
GO
Inbuilt memory:✓
RAM cassette:✓
.
Select "OFFLINE MODE".
Or put the cursor on "OFFLINE MODE", then press the [GO]
key.
.
Select the PLC model.
Others Function 10
EEPROM
EPROM
cassette:✓
cassette:✓
10-2
Advertisement
Table of Contents
