Overview of Features
The DSX-600 CableAnalyzer main and remote units are rugged,
hand-held instruments that you configure to certify,
troubleshoot, and document copper cabling. The DSX-600
includes these features:
The testers certify twisted pair cabling to Cat 6A/Class E
limits (500 MHz) in less than 10 seconds.
Gives a PASS or FAIL result based on a test limit that you
specify.
You can save approximately 12,700 Cat 6A Autotest results,
with plot data, in the tester's internal memory. You can save
more results on a removable flash drive.
™
Taptive
different views of the results and see more information about
cables.
ProjX
™
management system lets you set up projects to specify
the types of tests and the cable IDs necessary for a job and
monitor the progress and status of the job.
You can connect the tester to a wired or Wi-Fi network and
use the LinkWare
projects from a desktop or mobile device.
LinkWare PC software lets you upload test results to a PC and
make professional-quality test reports.
LinkWare Stats software makes browsable, graphical reports
of cable test statistics.
Chapter 1: Get Acquainted
user interface lets you quickly navigate through
™
Live web application to manage your
A
1