Table of Contents
Advertisement
DSX-600 CableAnalyzer
Technical Reference Handbook
Audible Tone
You can enable or disable the tones the tester makes during tests
and when you press keys. If you connect a remote tester to the
main tester, the remote uses the main tester's setting.
1
On the home screen, tap the TOOLS icon.
2
In the Audible Tone panel, tap the control to show On or Off.
3
To go back to the home screen, tap
Power Line Frequency
Set the power line frequency to the power frequency in the area
where you will use the tester. This setting decreases the effects of
ac noise on the circuits in the tester.
1
On the home screen, tap the TOOLS icon.
2
In the Power Line Frequency panel, tap the control to show
50 Hz or 60 Hz.
3
To go back to the home screen, tap
Display Brightness
1
On the home screen, tap the TOOLS icon, then tap Display.
2
On the brightness scale, tap or slide the yellow bar to adjust
the brightness, then tap DONE.
When you increase the display brightness, the
battery life decreases.
3
To go back to the home screen, tap
26
Note
or press .
or press .
or press .
- Quick Links:
- Overview of Features
- Pass*/Fail* Results
Hide quick links:
Advertisement
Table of Contents
