Fluke DSX-600 Technical Reference Handbook page 198

DSX-600 CableAnalyzer
Technical Reference Handbook
Table 9. Settings for the Wi-Fi Connection
Setting
Address Most networks use DHCP.
DHCP SSID: The tester does a scan for wireless networks and shows a
address list of available networks. Select the correct SSID.
settings
To connect to a hidden network, tap ADD SSID.
Security:
 Authentication: Select the authentication type that the
network uses:
 Open: Security credentials are not necessary.
 WEP: Select an encryption method and enter the necessary
keys.
 WPA/WPA2 Personal: Enter the password for the network.
 WPA/WPA2 Enterprise:
 EAP: Select an EAP type that is appropriate for the
authentication server.
 User and Password: Enter a user name (login name) and
password for the network.
 Alternate ID: The tester can use the Alternate ID with
some EAP methods to send an empty or anonymous
identity while the tester makes a private connection. The
tester then uses the private connection to send the User
name and Password you entered.
The tester can also use the Alternate ID to send the User
name and Password to an authentication server in a
different realm. In this situation, the Alternate ID can have
a format such as anonymous@MyCompany.com or /
MyCompany/anonymous.
Static Enter an IP address for the tester and the Subnet Mask,
address Gateway address, and DNS1 and DNS2 addresses for the
settings network. If you are not sure what to enter, speak to the
network administrator.
The Security settings are the same as for the DHCP address
settings.
180
Description