Fluke DSX-600 Technical Reference Handbook page 194

DSX-600 CableAnalyzer
Technical Reference Handbook
3 On the home screen, tap SYNC.
4 Select a wireless network if necessary.
If the network setting are not correct, the tester shows the
NETWORK screen and a message about the necessary settings.
a. To change the settings, tap the Wi-Fi panel.
b. To test the settings, go back to the WI-FI PORT screen, then
tap CONNECT.
When the tester connects to the network, the Wi-Fi
network connection icon shows at the top of the screen:
c. Go back to the TRANSFER RESULTS screen, then tap the
LinkWare Live panel.
5 On the LWL SIGN IN screen, if necessary, enter the ID and
password for your LinkWare Live account, then tap SIGN IN.
Enter a user name and password for the network, if necessary.
6 If you use other people's LinkWare Live accounts, the
ORGANIZATION screen shows. Tap the organization you want
to use.
7 On the SYNC PROJECTS screen (Figure 73), select the projects
you want to sync, then tap SYNC.
176