How To Replace A Saved Result That Failed; Delete, Rename, And Move Results - Fluke DSX-600 Technical Reference Handbook

DSX-600 CableAnalyzer
Technical Reference Handbook

How to Replace a Saved Result that Failed

To use the same test settings that were used for the saved result
1 On the home screen, tap the RESULTS icon.
2 On the RESULTS screen, tap a result that failed.
3 Tap TEST AGAIN.
4 When the test is completed, and if Auto Save is on, the tester
asks you if you want to overwrite the results. Tap Yes.
If Auto Save is off, tap FIX LATER (if the test failed) or SAVE (if
the test passed) to save the result.
To replace a result with a result that uses different test settings
1 Turn off Auto Save.
2 Make sure that the home screen shows the project that
contains the result you want to replace.
3 Select the necessary test settings.
4 Do the test, tap FIX LATER (if the test failed) or SAVE (if the
test passed), then enter the ID of the saved result.
5 The tester asks you if you want to overwrite the results. Tap
Yes.

Delete, Rename, and Move Results

Before you delete, rename, or move results, select the project that
contains the results and go to the MANAGE RESULTS screen:
1 On the home screen, tap the RESULTS icon. The RESULTS
screen shows the results in the active project.
2 To see the results in another project, tap VIEW ALL, then tap a
project.
3 Tap MANAGE to see the MANAGE RESULTS screen.
144