Table of Contents
Advertisement
Instruction book
Press the Enter button (13) to modify the setting. The utmost left value will blink. Change this value by using
the Scroll buttons (12). Press the Enter button (13) to confirm. Change the other values in the same way, as
required.
After modifying the settings, the screen may look as follows:
3.18 Calling up/modifying IP, Gateway and Subnetmask
Calling up
Starting from the Main screen:
Press the Scroll button (12) until <P.03> is shown and then press Enter button (13).
The next screen shows either OFF or ON. If ON, press the Enter button (13) to modify it to OFF. Use the
Scroll buttons Up or Down (12) to scroll between the items in this list (<IP> for IP address, <SUB> for
Subnetmask or <GATE> for Gateway):
2920 7090 51
45
Advertisement
Table of Contents
