Calling Up/Modifying Pressure Band Settings - Atlas Copco GA 5 Instruction Book

Instruction book

3.19 Calling up/modifying pressure band settings

Calling up the settings
Starting from the Main screen:
• Press Scroll button (12) until <P.04> is shown and then press Enter button (13). Pressure band 1 (<Pb.1>)
is shown on the display. Button (12) can be used to scroll to pressure band 2 (<Pb.2>).
• Press Enter button (13) on the desired pressure band. The load level of the selected pressure band appears.
Button (12) can be used to scroll to the unload level.
2920 7090 51 47