Scrolling Through All Screens - Atlas Copco GA 5 Instruction Book

Instruction book
• After servicing, reset the service timer. See section
3.8

Scrolling through all screens

Control panel
Scroll buttons (12) can be used to scroll through all screens. The screens are divided into register screens,
measured data screens, digital input screens (numbered as <d.in>, <d.1>, ...), parameter screens (numbered
as <P.01>, <P.02>, ...), protections screens (numbered as <Pr.01>,...) and test screens (numbered as <t.01>,...).
During scrolling, the numbers of the screens appear consecutively. For most screens, the unit of measurement
and the related pictograph are shown together with the screen number.
The screen shows the screen number <d.1>, the unit used <hrs> and the related symbol for running hours.
Press Enter key (13) to call up the actual running hours.
Overview of the screens
Digital input
screens
<d.in>
<d.1>
<d.2>
<d.3>
2920 7090 51
Control panel
Designation
Digital input status
Running hours (hrs or x 1000 hrs)
Motor starts (x 1 or x 1000)
Module hours (hrs or x 1000 hrs)
Calling up/resetting the service timer
Example
Related topic
See section
See section
See section
Calling-up running hours
Calling up motor starts
Calling up module hours
35