Instruction book
Condensate drains
Maintenance instructions
Consult section
Interval
Weekly
Monthly
5.3
Pictographs
Pictographs shown on OSD
Reference
1
2
3
4
5
6
7
8
2920 7090 51
OSD unit
for the references.
Running hours
Operation
50
Check pressure gauge (2). If the pressure reaches 2 bar(e) (29 psig)
or every 6000 operating hours, replace filter (3): Unscrew the filter. Fill
the new filter with water, lightly oil its gasket, screw it on and tighten by
hand (approx. half a turn). Check strainer (5); if necessary, clean it.
200
Check the oil level in collector (4). If nearly full, disconnect oil tube (8)
and deliver the oil to the local oil collection service. Reinstall an empty
collector.
Description
Oil
Oil outlet
Condensate outlet
Pressure
Inlet
Service point drain
Separator inlet pressure
Oil gasket, screw on filter and tighten by hand (approx. half a turn)
115