Atlas Copco GA 5 Instruction Book page 38

Digital input
screens
<d.4>
<d.5>
<d.6>
<d.7>
Parameter
screens
<P.01>
<P.02>
<P.03>
<P.04>
<P.05>
<P.06>
<P.07>
<P.08>
<P.09>
<P.10>
<P.11>
<P.12>
<P.13>
<P.14>
Protections
screens
<Pr.01>
<Pr.02>
<Pr.03>
36
Designation
Loading hours (hrs or x1000 hrs)
Load relay (x1 or x 1000)
Service timer reading (hrs or x 1000 hrs)
Actual program version
Designation
Selection between local, remote or LAN
control
Setting a node ID for LAN control and the
channels for Mk 4 and Mk 5
Settings for IP, gateway and Subnet mask
Pressure band settings
Setting a pressure band selection
Modifying a service timer
Setting of unit for temperature
Setting of unit for pressure
Selection for function: Automatic restart after
voltage failure (active or not, only for Atlas
Copco)
Selection between Y-D or DOL starting
Setting of load delay time
Setting of minimum stop time
Setting a password
Remote pressure sensing
Designation
Protections screens
Related topic
See section Calling up loading hours
See section Calling up Calling up load relay
See section Calling up/resetting the service
timer
Related topic
See section Selection between Local
Remote and LAN control
See section Calling up/modifying CAN
address control
See section Calling up/modifying IP,
Gateway and Subnetmask
See section Calling up/modifying pressure
band settings
See section Modifying pressure band
selection
See section Calling up/modifying service
timer settings
See section Calling up/modifying unit of
temperature
See section Calling up/modifying unit of
pressure
See section Activating automatic restart
See section Selection between Y-D or DOL
starting
See section Calling up/modifying load delay
time
See section Calling up/Modifying minimum
stop time
See section Activating password protection
See section Activate Load/Unload remote
sensing
Related topic
See section Calling up/modifying protection
settings
Instruction book
2920 7090 51