Table of Contents
Advertisement
7.3
Starting
Procedure
Step
Action
-
Switch on the voltage. Check that voltage on LED (6) lights up.
-
Open the air outlet valve.
-
Close the condensate drain valve(s) (Dm).
-
Press start button (1) on the control panel. The compressor starts running and the automatic
operation LED (8) lights up. Ten seconds after starting, the drive motor switches over from star
to delta and the compressor starts running loaded.
136
For the position of the air outlet valve and the drain connections, see sections
and
Condensate system
Control panel of the Elektronikon® controller
Control panel of the Elektronikon® Graphic controller
Instruction book
Introduction
2920 7090 51
Advertisement
Table of Contents
