Table of Contents
Advertisement
Instruction book
References
A
B
C
D
Description
The cooling system comprises of air cooler (Ca) and oil cooler (Co). The cooling air is generated by a fan
(FN). The fan is set on the shaft of the motor.
2.5
Condensate system
Condensate drains
Pack versions are equipped with a condensate trap in the air outlet system. The trap is equipped with a valve
for automatic draining during operation and is connected to the automatic drain outlet (Da) and to a manually
operated valve (Dm1) for draining after stopping the compressor.
Tank-mounted compressors are also provided with a manual condensate drain valve (Dm2) for draining the
condensate trapped in the receiver.
Full-Feature versions are equipped with an electronic water drain for automatic draining of the condensate
during operation. The electronic drain is connected to automatic drain outlet (Da) and to a manually operated
valve (Dm1) for draining after stopping the compressor.
2920 7090 51
Description
Intake air
Compressed air/oil
Compressed air
Oil
Condensate drains on a floor-mounted version
Condensate drains on a tank-mounted Full-Feature version
19
Advertisement
Table of Contents
