Modify Settings Menu; Modifying Regulation Settings - Atlas Copco ZR 110 Instruction Book

3.17 Modify settings menu

Function
To modify a number of programmable settings:
• Regulation settings (see section
• Protection settings (see section
• Service settings (see section

3.18 Modifying regulation settings

Control panel
Function
To modify a number of regulation settings. Consult the menu flow in section
Procedure
Starting from the Main screen (see
• Press key "Menu" (F1).
• Press key (1) until "Modify settings" is shown.
• Activate the menu by pressing key "Select" (F2).
• The first item ("Regulation") is shown. Press key "Select" (F2) and use keys (1) to scroll to the
setting to be modified.
• For each parameter, the modifying procedure is similar to the example below.
60
Modifying regulation
Modifying protection
Modifying service
Main screen
The regulator will not accept new values beyond the limitations.
It is possible to check the limitations which are valid for the parameter to be modified by
selecting "Limits".
settings).
settings).
settings).
menu):
Instruction book
Control programs.
2920 1815 04