Modify Parameters Menu; Modifying Parameters - Atlas Copco ZT 55 Instruction Book

3.13 Modify parameters menu

Function
To modify a number of programmable settings:
• Parameters (see section
• Protections (see section
• Service plan settings (see section
• Clock function settings (see section
• Configuration settings (see section

3.14 Modifying parameters

Control panel
Function
To modify a number of parameters. Consult the menu flow in section
Procedure
Starting from the Main screen (see
• Press the key "Menu" (F1).
• Press the arrow down key (1) until "Modify Parameters" is followed by a horizontal arrow.
• Activate the menu by pressing the tabulator key (2).
• The first item "Parameters" will be followed by a horizontal arrow.
• Press the tabulator key (2): the first items and their settings will appear.
• Press the arrow down key (1) until the parameter to be modified is followed by a horizontal arrow.
Modifying the loading pressure setpoint
If desired, the operator can program two pressure bands (Loading pressure/Unloading pressure and
Loading pressure 2/Unloading pressure 2).
• Consult the section Procedure to select "Loading Pressure".
38
Modifying parameters).
Modifying protections).
Modifying service plan
Modifying clock function
Modifying configuration
Main screen menu):
settings).
settings).
settings).
Control programs.
Instruction book
APFS998935v00