Pictographs - Atlas Copco GA 18 VSD+ Instruction Book

4.4

Pictographs

Reference
1
2
3
4
5
6
7
8
9
10
62
Designation
Lock out/ tag out the compressor before starting maintenance or repairs
Automatic condensate drain
Manual condensate drain
Lightly oil the gasket of the oil filter, screw it on and tighten by hand (approx. half a turn)
Warning, hot surface
Stop the compressor before cleaning the coolers
Warning, voltage
Switch off the voltage and wait at least 10 minutes before maintenance
Compressor remains pressurized for 180 seconds after switching off the voltage
If the rotation direction is wrong, open the isolating switch in the voltage supply line and
reverse two incoming electric lines
Pictographs
Instruction book
2920 7110 05