Programming Sitrans Lr260 - Siemens SITRANS LR260 Operating Instructions Manual

Programming SITRANS LR260

Notes:
• While the device is in PROGRAM mode, the output remains fixed and does not
respond to changes in the device.
• Do not use the handheld programmer at the same time as SIMATIC PDM or erratic
operation may result.
• SITRANS LR260 automatically returns to Measurement mode after a period of
inactivity in PROGRAM mode (between 15 seconds and 10 minutes, depending on
the menu level).
Change parameter settings and set operating conditions to suit your specific application.
Operating via SIMATIC PDM
• See
Programming via the handheld programmer
Parameter menus
Note:
For the complete list of parameters with instructions, see
on page 45
.
Parameters are identified by name and organized into function groups, then arranged in a
5-level menu structure (see
Note:
In Navigation mode
ARROW keys move to the
next menu item in the
direction of the arrow.
• For the complete list of parameters with instructions, see
1. Enter PROGRAM mode
• Point the programmer at the display (from a
maximum distance of 500 mm [1.6 ft.]).
• R R IGHT arrow
mode and opens menu level 1.
• M M ode opens the menu level last
displayed in PROGRAM mode within the last
30 minutes, or menu level 1 if power has
been cycled since then.
7ML19985KE02 SITRANS LR260 (HART) – INSTRUCTION MANUAL
on page 32 for remote operation.
LCD menu structure
on page 2).
1. QUICK START
2. SETUP
activates PROGRAM
max. 500 mm
Parameter Reference
2.1. DEVICE
2.2. INPUT
2.2.1. SENSOR CALIB.
2.2.4. ECHO PROC.
Parameter Reference
on page 45.
handheld programmer
(ordered separately)
display
(1.6 ft)
Page 25