Programming Sitrans Lr 460; The Handheld Programmer - Siemens Sitrans LR 460 Instruction Manual

Programming SITRANS LR 460

The parameters that control the operation of the LR 460 are organized into function
groups, and arranged in a 4-level menu structure that can be accessed either via the
handheld programmer, or via PDM (see

The handheld programmer

To activate PROGRAM mode, point the handheld programmer at the display (from a
maximum distance of 600 mm [2 ft.]), and press the Mode key
The handheld programmer has two modes of operation:
1. Navigation Mode
• In this mode, the rightmost digit of the menu number flashes (the Edit Mode
icon is not visible).
• Press Up or Down arrow to change the menu number.
• Press Right or Left arrow once to move to the next/previous menu level.
• Press Right arrow again to switch from Navigation to Edit Mode
For Quick Access to parameters via the handheld programmer, press Mode key
Note:
to activate PROGRAM mode, followed by Home key
LCD menu structure
number (see
1.
Programming via the handheld programmer
See
2.
When there is no further menu sub-level to access.
7ML19985JM01
1
display
max. 600 mm
(2 ft.)
handheld
programmer
function
Keys
on page 37 for details).
SITRANS LR 460 (4-20 mA) – INSTRUCTION MANUAL
LCD menu structure
on page 37).
1 2
5 6 7
9 0
C
on page 33 for more detail.
.
3 4
8
numeric keys
2
, or vice versa.
, then enter the menu
Page II-27