Programming Sitrans Probe Lu (Profibus Pa); The Handheld Programmer - Siemens Sitrans Probe LU Instruction Manual

Oxley Creek WWTP Water Reclamation
(Probe LU Manual) Vendor Manual

Programming SITRANS Probe LU (PROFIBUS PA)

The parameters that control the operation of the Probe LU are organized into function
groups, and arranged in a 4-level menu structure that can be accessed either via the
handheld programmer, or via PDM and PROFIBUS PA. (For charts showing the complete
menu structure, please see

The handheld programmer

To activate PROGRAM mode, point the handheld programmer at the display from a
maximum distance of 600 mm (2 ft), and press the Mode key
hand-held programmer
max. 600 mm
(2 ft)
Within Program Mode, the handheld programmer has two sub-modes of operation:
Navigation and Edit.
• Press Mode key
Mode: the rightmost digit of the menu number flashes, and the PROGRAM icon
is not visible.
• Press Right arrow a second time to change the mode from Navigation to Edit
mode.
• In Edit mode, the PROGRAM icon
Note:
For Quick Access to parameters via the handheld programmer, press Mode key
to activate PROGRAM mode, then enter the menu number (see
menu structure
1.
For more instructions on local programming using the handheld programmer, please
Appendix D: programming via the handheld programmer
see
7ML19985JB02
Appendix E: LCD menu structure
1
display
to switch from RUN to PROGRAM and enter Navigation
on page 49).
SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL
function
keys
appears and flashes.
Doc Id: VM11
Active Date: 15/12/2006
on page 49.)
.
numeric keys
Appendix E: LCD
on page 42.
Page 17