Programming Sitrans Lr250 - Siemens Sitrans LR250 Instruction Manual

Programming SITRANS LR250

Change parameter settings and set operating conditions to suit your specific application.
Operating via SIMATIC PDM
• See
Programming via the handheld programmer
Notes:
• The Quick Start wizard settings are inter-related and changes apply only after you
click on Transfer at the end of step 5.
• Do not use the Quick Start wizard to modify individual parameter: see
Parameter Reference
instead
• Initial Quick Start parameter values are not default values and do not necessarily
reflect the current device configuration.
• SITRANS LR250 automatically returns to Measurement mode after a period of
inactivity in PROGRAM mode (between 15 seconds and 10 minutes, depending on
the menu level).
Parameter menus
Parameters are identified by name and organized into function groups, then arranged in a
5-level menu structure (see
Note:
In Navigation mode
ARROW keys move to the
next menu item in the
direction of the arrow.
• For the complete list of parameters with instructions, see
SITRANS LR250 automatically returns to Measurement mode after a period of
Note:
inactivity in PROGRAM mode (between 15 seconds and 10 minutes, depending on the
menu level).
1. Enter PROGRAM mode
• Point the programmer at the display (from a
maximum distance of 600 mm [2 ft.]).
• Right ARROW
mode and opens menu level 1.
• Mode
displayed in PROGRAM mode within the last
10 minutes, or menu level 1 if power has
been cycled since then.
7ML19985JE01
on page 37 for remote operation.
on page 53.
LCD menu structure
activates PROGRAM
opens the menu level last
SITRANS LR250 (HART) – INSTRUCTION MANUAL
on page 137).
1. QUICK START
2. SETUP
2.1. DEVICE
2.2. INPUT
2.2.1. SENSOR CALIB.
2.2.1.1. ANTENNA
Parameter Reference
handheld programmer
(ordered separately)
Max. 600 mm
(2 ft)
on page 53.
display
Page 31