Wiring Diagram - Viper 4811V Owner's Manual

Wiring Diagram

(+) or (-) LIGHT
FLASH POLARITY
(10A (MAXIMUM)
FUSE JUMPER)
Remote Start
8-pin Harness
Remote Start
ON
Shutoff Switch
IMPORTANT!
Remote Start Shutoff
switch must be plugged in
and in the ON position
5
Note: Fuse is under the plastic cover and needs to
be installed for the appropriate light flash polarity.
10A FUSE
MINI ATM
Main 6-pin
Harness
Door Lock
3-pin Harness
RF/Control
Center Port
D2D Port
(for external Directed
interface module)
AUX/Shutdown
24-pin Harness
Bitwriter/Directed
SmartStart Port
Thermistor/Temp Sensor
(+) or (-) Horn Input
Polarity Jumper
© 2015 Directed. All rights reserved.