Basic Remote Functions; Reset And Deletion - Viper 4811V Owner's Manual

Basic Remote Functions

5-Button Remote Control
Level
Direct Access
Button
Lock
Unlock
Remote Start
Trunk Release
Function Shift
Note: See Owner's Guide of your specific model for exact functionality. The above table reflects the LCD
model but is also applicable to the LED and Companion remote controls (however, some f button functions
may differ).
Important: If the Control Center) has been replaced, all remote controls must be re-paired with the system.
See Remote Pairing for details.

Reset and Deletion

If a feature/Virtual Tach needs to be reset or the remote controls need to be deleted, use the following
procedure.
1. Turn the ignition to the ON position (The heavy gauge pink wire must be connected).
2. Within 10 seconds, press and release the Control Center button 2 times if you want to delete remote
controls, 3 times to reset features or 4 times to reset Virtual Tach.. These function steps are described
next.
• Step 2: Delete remotes: This feature erases all remote controls from the memory of the keyless entry
system. This is useful in cases when a customer's remote is lost or stolen.
Note: This does not reset the programmed features of the keyless entry system or reset the Virtual Tach
setting.
• Step 3: Reset Features: This resets all features of the keyless entry system to the factory default settings.
Note: This feature does not delete the remote controls from the keyless entry system or reset the Virtual
Tach setting
• Step 4: Virtual Tach Reset: Deletes all previously learned values for Virtual Tach, and on the next
remote start sequence the unit begins Virtual Tach initialization.
Note: The "Zap" feature on the Bitwriter does not reset the Virtual Tach setting.
3. Once you have selected the function step, press the Control Center button once more and hold it. The
LED flashes and the horn honks to confirm the selected functional step. Do not release the Control
Center button.
4. While holding the Control Center button, press the
unit honks to confirm that the remote controls have successfully been deleted or the features have been
reset.
5. Once the feature is reset, the Control Center button can be released.
26
x 1
Silent Mode Lock
Silent Mode Unlock Remote Valet
Runtime Reset Timer Mode
AUX 1 AUX 2
Cabin Temperature Runtime Check
Request (2-Way only) (2-Way only)
x 2 x 3
Car Finder
Smart Start
AUX 3
button on a programmed remote control. The
x 4
Rear Defogger
AUX 4
© 2015 Directed. All rights reserved.