Viper 4811V Owner's Manual page 41

Table of Contents

Advertisement

1. System Locking mode
1. Active: the transmitter must be used to lock the system.
2. Passive Locking: after exiting the vehicle the system will automatically lock the doors.
3. Auto re-locking: if the vehicle is not entered after receiving a unlock command, the system will
automatically re-lock the doors.
2. Panic Mode
1. On: the Panic output can be activated at any time.
2. Ign. OFF Only: the Panic output can be activated only when the ignition is OFF.
3. OFF: the Panic output is defeated.
3. Horn Duration
1. Options 1-4: Confirmation Honks when locking/unlocking are turned ON with selectable horn honk
output timing to compensate for OEM horn efficiency.
2. Option 5: Confirmation Honks when locking/unlocking are turned OFF while the panic mode horn
honk output is still active.
4. Ign-controlled Locks
1. No Ign-locking: the door lock/unlock outputs will not activate when ignition is turned ON/OFF.
2. Lock & Unlock: the door lock & unlock output will activate when ignition is turned ON & OFF.
3. Lock Only: the door lock output will activate when ignition is turned ON.
4. Unlock Only: the door unlock output will activate when ignition is turned OFF.
5. Door Lock Pulses
1. Single: the door lock & unlock outputs will pulse once.
2. Double Unlock only: the unlock output only will pulse twice.
3. Double Lock Only: the lock output only will pulse twice.
4. Double Lock & Unlock: the lock & unlock outputs will pulse twice.
6. Door Lock Output Duration
1. 0.8 sec.: the door lock/unlock output pulses will be 800 milliseconds in duration.
2. 3.5 sec.: the door lock/unlock pulses will be 3.5 seconds in duration.
3. 0.4 sec.: the door lock/unlock pulses will be 400 milliseconds in duration.
7. Ignition Controlled 2nd Unlock
1. Delayed: for Ign-controlled unlocking, the 2nd Unlock will activate 800 milliseconds after the first
(driver door) unlock.
2. Immediate: for Ign-controlled unlocking, the 2nd Unlock will activate at the same time as the first
(driver door) unlock.
8. Comfort Closure
1. No comfort Closure: Comfort Closure is defeated when locking.
2. Comfort Closure 1: When locking the door lock pulse (or 2nd pulse for double pulses) will remain
ON for 20 seconds.
3. Comfort Closure 2: When locking 800 milliseconds following last door lock pulse (or 2nd pulse for
double pulses); the door lock output will turn ON again for 20 seconds.
9. Hood Switch Type
1. Normally Open: for vehicles with a hood switch that rests at power or ground when the hood is
OPEN.
2. Normally Closed: for vehicles with a hood switch that rests at power or ground when the hood is
CLOSED.
16
© 2015 Directed. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4816v

Table of Contents