Wiring Diagrams; Primary Harness (H1) Wiring Diagram - Viper 160XVL Installation Manual

wiring diagrams

primary harness (H1) wiring diagram

The primary harness supplied with this unit is the standard 12-pin harness used by Directed Electronics security
systems. Three wires in the plug are not used. The upgrade from this unit to a security system would simply
require unplugging and exchanging control units and connecting the necessary wires to the vehicle. The func-
tions of all the wires that are used in the primary harness are outlined in the following wiring diagram and the
wire connections are described in the wire connection guides.
______
H1/1
______
H1/2
______
H1/3
______
H1/4
______
H1/5
______
H1/6
______
H1/7
______
H1/8
______
H1/9
______
H1/10
______
H1/11
______
H1/12
10
RED/WHITE
RED
BROWN
BLACK
BLUE
BLACK/WHITE
WHITE/BLUE
WHITE
ORANGE
(-)200 mA CHANNEL 2 VALIDITY OUTPUT
(+) CONSTANT POWER INPUT
(-) HORN HONK OUTPUT
(-) CHASSIS GROUND INPUT
(-) SECOND UNLOCK OUTPUT
(-)200 mA DOMELIGHT SUPERVISION OUTPUT
(-) REMOTE START ACTIVATION INPUT
(+)/(-) SELECTABLE LIGHT FLASH OUTPUT
(-) 500 mA ARMED OUTPUT
© 2006 Directed Electronics—all rights reserved
NO FUNCTION
NO FUNCTION
NO FUNCTION