Feature Menus - Viper 4811V Owner's Manual

Once a feature is programmed:
1. Other features can be programmed within the same Menu.
2. Another Menu can be selected.
3. The Learn Routine can be exited if programming is complete.
To access another feature in the same Menu:
1. Press and release the Control Center button the number of times necessary to advance from the
feature just programmed to the next one desired to program.
2. Then press the Control Center button once more and hold it.
To select another Menu:
1. Press and hold the Control Center button.
2. After 3 seconds, the unit advances to the next Menu, the LED flashes and the horn honks, indicating
which Menu has been accessed.
The learn routine exits if any of the following occurs:
• The ignition is turned ON.
• There is no activity for 30 seconds.
• The Control Center button is pressed too many times.

Feature Menus

Default settings are Opt. 1 (in bold type).
Menu 1 - Vehicle Integration
Item Feature
1 System Locking
Mode
2 Panic Mode *
3 Horn Function
(milliseconds)
4 Ign-controlled Locks
5 Door Lock Pulses
6 Door Lock output
duration (seconds)
7 Ignition Controlled
2nd Unlock
8 Comfort Closure *
9 Hood Switch Type
10 Door Switch Type
11 Remote Button
unlock (Ign OFF)**
* Not available with the 1-button remote control.
** Not available with the 1-way remote control.
15
Opt. 2
Opt. 1
Passive Locking
Active Locking
ON Ign. OFF only
Confirmation Confirmation
Honk (20 ms) Honk (30 ms) &
& Panic Panic
No Ign-locking Lock & Unlock
Single Double Unlock
Only
0.8 sec. 3.5 sec.
Immediate 2nd
Delayed 2nd
Unlock ON/ Unlock ON/
Ign-control Ign-control with
first Unlock
after first
Unlock
No Comfort Comfort Closure 1
Closure
Normally Open Normally
Closed
Normally Open Normally
Closed
ON OFF
Opt. 3 Opt.4
Auto Re-locking
OFF
Confirmation Confirmation
Honk (40 ms) & Honk (50 ms) &
Panic Panic
Lock Only Unlock Only
Double Lock Only Double Lock &
Unlock
0.4 sec.
Comfort Closure 2
Opt. 5+
Confirmation
Honk OFF - Panic
Only (Pulsed)
© 2015 Directed. All rights reserved.