Viper 4811V Owner's Manual page 25

Programming System Features
The System Features Learn Routine dictates how the unit operates. It is possible to
access and change most of the feature settings using the Control button.
1. Turn the ignition on, then off.
2. Select a Menu. Press and hold the Control button. The number of horn honks
and LED flashes indicates the menu number. One horn honk and LED flash
indicates menu 1, two horn honks and LED flashes - menu 2 and three horn
honks and LED flashes for menu 3.
3. When the desired menu horn honks are heard with LED flashes, release the
Control button.
4. Select a Feature. Press and release the Control button the number of times
corresponding to the feature you wish to change. Then press and hold one
more time to select the features.
5. Program the Feature. While holding the Control button, you can change the
feature by pressing the button on the remote control, each press will cycle
through each option.
Once a feature is programmed:
• Other features can be programmed within the same menu
• Another menu can be selected
• The learn routine can be exited if programming is complete
To access another feature in the same menu:
1. Press and release the Control button the number of times necessary to advance
from the feature you just programmed to the next one you want to program.
2. Then press the Control button once more and hold it.
To select another menu:
1. Press and hold the Control button.
2. After 3 seconds, the unit advances to the next menu and the horn honks and
the LED flashes, indicating which menu has been accessed.
The learn routine exits if any of the following occurs:
• The ignition is turned On
• There is no activity for 30 seconds
• The Control button is pressed too many times
Bitwriter - only Options
If programming with the Bitwriter®, the learn routine can be locked or un-
locked. If the learn routine has previously been locked, it must be unlocked
with Bitwriter® - this cannot be done manually with the Control button.
The Bitwriter® gives you access to a wider range of system options. These
features and the adjustments that may be programmed are described in the table
below. Default settings are in bold.
Menu Feature Default Opt. 2 Opt. 3 Opt.4 Opt. 5+
Item
1 Aux/Trunk Icon Type* Trunk Window Sunroof Audio Lights/Left dr/Right
dr/Rear Hatch
2 Aux 1 Timed Output 30 sec. Options: 1 to 90 sec.
3 Aux 1 Icon Type* Pulsed Trunk Window Sunroof Audio/Lights/Left dr/
Right dr/Rear Hatch/
Timed/Latched
4 Aux 2 Timed Output 30 sec. Options: 1 to 90 sec.
5 Aux 2 Icon Type* Pulsed Trunk Window Sunroof Audio/Lights/Left dr/
Right dr/Rear Hatch/
Timed/Latched
6 Aux 3 Timed Output 30 sec. Options: 1 to 90 sec.
7 Aux 3 Icon Type * Pulsed Trunk Window Sunroof Audio/Lights/Left dr/
Right dr/Rear Hatch/
Timed/Latched
8 Aux 4 Timed Output 30 sec. Options: 1 to 90 sec.
9 Remote Start Runtime 12 min. Options: 1 to 60 min.
© 2016 Directed. All rights Reserved.
Menu Feature Default Opt. 2 Opt. 3 Opt.4 Opt. 5+
Item
10 Timer Mode Runtime 12 min. Options: 1 to 16 min.
(minutes) **
11 Timer Mode Starts** 6 starts Options: 1/2/3/4 to 24 (Starts) in increments of 2
12 Timer mode intervals Options: 1/2/3/4 to 24 in 2 hour increments
3 hr.
(hours)**
13 Smart start low Options: OFF, -20° to 70° in 10° increments
0° (F)
temp**
14 Smart start high Options: OFF, 40° to 130° in 10° increments
100° (F)
temp**
15 Smart start low bat- 10.5V Options: OFF, 9V to 12.5V in 0.5V increments
tery (volts)**
16 Diesel Start Delay 15 sec. Options: 1 to 90 sec.
type (seconds)
17 6 Options: 0 to 20 in increments of 1
Starter Release
(normal)
Fine Tune
18 Virtual Tach Fine Tune Not Options: Not initialized, 0 to 1000 in 50 millisecond
Initial- increments
ized
19 Feature Programming Unlocked Locked
20 Transmitter Program- Unlocked Locked
ming
* Feature only available on 2-way LCD system.
** Not applicable to 1-way or 1 button remote controls.
Feature Menus
Default settings are in bold type.
Menu 1 - Vehicle Integration
Menu Feature Opt. 1 Opt. 2 Opt. 3 Opt.4
Item
1 System Locking Mode Active Passive Auto Re-
Locking Locking locking
2 Panic Mode * On Ign Off Off
only
3 Horn Function Confirma- Confirma- Confirma- Confirma-
tion Chirp tion Chirp tion Chirp tion Chirp
(20 ms) & (30 ms) & (40 ms) & (50 ms) &
Panic Panic Panic Panic
4 Ign-controlled locks No Ign- Lock & Lock Only Unlock
locking Unlock Only
5 Door Lock Pulses Single Double Double Double
Unlock Lock Only Lock &
Only Unlock
6 Door Lock output 0.8 sec. 3.5 sec. 0.4 sec.
duration
7 2nd Unlock 2nd unlock 2nd unlock
on/ Ign- on/ Ign-
control after control with
first unlock first unlock
8 Comfort Closure * No Comfort Comfort Comfort
Closure 1 Closure 2
Closure
9 Hood Trigger Type Normally Normally
Open
closed
10 Door Switch Type Normally Normally
open
closed
11 Ignition Off msg * On Off
(remote button unlock)
* Not applicable to 1-way or 1 button remote controls.
.
Menu 2 - Convenience
Menu Feature Opt. 1 Opt. 2 Opt. 3
Item
1 One-time Bypass No Bypass Bypass
2 Valet Switch Pulse 1 2 3
Count
3 Door Ajar Error msg * On Off
4 Ign-controlled Dome On Off
light
5 OEM Alarm Disarm On Off
w/Aux/trunk*
6 OEM Alarm Disarm Before Remote
With
Output Unlock Unlock Start Only
7 OEM Alarm Disarm 1 2
Pulses
8 Aux 1 Output type ** Validity Latch Latch/
reset/ign
9 Aux 1 Linking No Link- Link to Link to
ing Lock* Unlock
10 Aux 2 Output type ** Validity Latch Latch
reset/ign
11 Aux 2 Linking No Link- Link to Link to
ing Lock* Unlock
12 Aux 3 Output type** Validity Latch Latch
reset/ign
13 Aux 3 Linking No Link- Link to Link to
ing Lock* Unlock
14 Aux 4 Output Type** Validity Latch Latch
reset/ign
15 Aux 4 Linking No linking Link to Link to
Lock* Unlock
Opt. 5+
16 Aux/Trunk Output type Validity Off 2nd unlock
* Not applicable to 1-way or 1 button remote controls.
** Aux channels with the 1 button remote can only be accessed with channel
linking to unlock or remote start or with the optional SmartStart module.
Confir-
mation
Menu 3 - Remote start
Chirp Off
- Panic
Menu Feature Opt. 1 Opt. 2 Opt. 3
Only *
Item
(Pulsed)
1 Transmission Mode Manual Automatic
2 Engine Checking Mode Virtual Voltage Off
Tach
3 Cranking Time 0.6 sec. 0.8 sec. 1.0 sec.
4 Remote Start Runtime 12 min. 24 min. 60 min.
5 Activation Pulse Count 1 2
6 Turbo Mode * No Turbo On-1 min. On-3 min.
Mode
7 Timer Mode Runtime** 12 min. 3 min. 6 min.
8 Flex Relay Function Ignition 2 Acces- Starter 2
sory 2
9 Diesel Start Delay Wait-to Timed 15 Timed 30
Start sec. sec.
input
10 Accessory during Diesel On Off
Start Delay
11 Status 2 Output Status Latch Rear Pulse Rear
Defogger Defogger
12 Parking Light Output Constant Pulsed Off
Menu Feature Opt. 1 Opt. 2
Item
Opt.4 Opt. 5+
13 Anti-grind Output On Off
14 Tach Mode Starter Normal Increase
Release
4 5
15 Vehicle temp Off On
auto report**
16 Remote Start Safelock Off On
* With the 1 button remote; turbo timer mode can only be activated by adding
a push button to the white/blue (-) activation input wire on the 24 pin har-
ness.
** Not applicable to 1-way or 1 button remote controls.
Reset and Deletion
Timed Off (5)/2nd
Unlock (6)
To reset the features/virtual tach or delete remote controls follow this procedure:
Link to Link to
Lock/ Remote Start
1. Turn the key to the ON position.
Unlock* only
2. Within 10 seconds press and release the control button: two times to delete
Timed Off (5)/2nd
remote controls, three times to reset the features to default or four times to reset
unlock (6)
virtual tach.
Link to Link to 3. Once you have selected the function step, press the control button once more
Lock/ Remote Start
and hold it. The LED will flash and the horn honks to confirm the functional step
Unlock* only
chosen. Release the control button.
Timed Off (5)/2nd
4. Press the button on a programmed remote control. The horn honks confirming
unlock (6)
the feature has been reset/deleted.
Link to Smart Key
5. Turn the ignition off or wait 60 seconds to exit the reset/delete procedure, the
Lock/ Control (Link
horn emits two sounds to confirm.
Unlock* to Remote
Start Off)
Note: Deleting a remote control does not reset the features or virtual tach, resetting
Timed Off (5)/2nd
the features does not delete remote controls or reset virtual tach. The Zap feature on
Unlock (6)
the Bitwriter will not reset the virtual tach setting.
Link to Link to
Lock/ Remote Start
Unlock* Only
Reset/delete will exit if:
• The ignition is turned off.
• 60 seconds lapses with no actions.
• The control button is pressed too many times.
Remote Functions
System State Press/Release
ENGINE OFF START ENGINE
Opt.4 Opt. 5+
ENGINE ON UNLOCK DOORS
Tachom-
eter
See owner's guide for more information.
1.2 sec. 1.4 (5) /1.6
(6)/ 1.8 (7)/
2.0 (8)/
4.0(9)
On-5 min. On-10 min.
9 min.
Timed 45
sec.
More detailed information about
this system can be found online at:
www.directechs.com
Opt. 3 Opt.4 Opt. 5+
Decrease
Press/Hold for 3 sec.
CAR FINDER
STOP ENGINE
QRN4816 2016-047
2