Prerequisites For Ipmi Configuration - Symantec NetBackup 5230 Installation Manual

Prerequisites for IPMI configuration

Before installation, check whether you need to submit a qualification certificate
■
of the installation company to the property management in charge of the
installation site.
Before transportation, ensure that the dimensions of the devices meet the
■
requirements of the transportation passages (such as elevators and
passageways).
During transportation of the devices, avoid collision with doors, walls, or other
structures. Do not touch the surface of components with dirty gloves.
See "Power supply overview"
See "Electrical safety"
See "Heat dissipation"
Verify the following configuration prerequisites:
Ensure that you have a dedicated network infrastructure. The remote
■
management port is1 Gb/s for NetBackup 5230 appliances.
The remote management port can auto-negotiate its link speed of up to 1 Gbps
■
for 5230 appliances.
Note: If the IPMI is connected to a managed switch port, Symantec recommends
configuring the switch port to auto-negotiation.
If a firewall exists between the appliance and the remote devices that manage
■
an appliance (like a laptop computer), open the following ports:
22 SSH
80 HTTP
162 SNMP
443 HTTPS
623 KVM
5120 RMM ISO/CD
5123 RMM floppy
5124 CD
on page 20.
on page 21.
on page 21.
Installation requirements
Prerequisites for IPMI configuration
23