Installing Transmitter - JTS R-4 Instruction Manual

5-5 Installing transmitter //

1. Open the battery cover as indicated by the arrow.
2. Place 2 AA batteries in the battery compartment according to their
polarity.
(Figure2)
3. Close the battery cover back on.
4. Depending on the type of microphone, insert the 4-pin mini XLR into
MIC IN to finish the installation.
5. Push Power ON/OFF to turn on.
6. Define the transmitter parameters according to the instructions.
AT AT
Hi Hi
UF-20TB UF-20TB
G: 1 C: 11 G: 1 C: 11
633.875 MHz 633.875 MHz
IDoff IDoff
-12dB -12dB
UHF PLL Transmitter
Figure1
(Figure3)
(Figure4)
(Figure5)
AT AT
Hi Hi
UF-20TB UF-20TB
G: 1 C: 11 G: 1 C: 11
633.875 MHz 633.875 MHz
IDoff IDoff
-12dB -12dB
UHF PLL Transmitter
Figure2 Figure3
(Figure 1)
Figure4 Figure5
Hi
UF-20TB
G: 1 C
633.875
I
-1
28