Operation - JTS R-4 Instruction Manual

6-4 Operation //

Parameter settings
Push and hold SET for 2 seconds to enter the
setting mode. Push SET repeatedly to select
the desired item. Use ▲ / ▼ for parameter
settings. Push SET again to save the change
and exit.
◎  F REQ: Frequency setting
Increment of 1MHz
Increment of 0.025MHz
◎   G ROUP: group/channel setting
G (group) Select default group 1~6
CH (channel) Select default channel(s),
up to 22
Select
with▲/▼
Select
with▲/▼
Start with those digits in 1MHz and then
those in 0.025MHz
Start with group number and then channel
number.
46