Specification; Handheld Transmitter - JTS US-8216D Series Instruction Manual

3. Specification

3-1 Receiver
Model No .........................................
Frequency Preparation..............
Carrier Frequency Range.......
S/N Ratio...........................................
T.H.D.................................
Display..............................
Display Contents...........................
Controls............................
Audio Output Level....................
AF Output Impedance..............
Squelch.............................
Operation Voltage.........................
Output Connector.......................
Dimension(m/m)...............

3-2 Handheld Transmitter

Model No......................................
Frequency Preparation.........
Carrier FrequencyRange....
RF Outputs..................................
Stability............................................
Frequency Deviaion..............
LED Display................................
Controls..........................................
Spurious Emissions................
Audio Frequency Resonse
Battery..............................................
US-8001D(DB)/US-8002D(DB)/US-8216D
PLL Synthesized Control
502~960 MHz
> 105dB
<0.6%@1KHz
LED
Antenna A/B, RF/AF Status
Power On/Off, Channel Selecting, Audio Level
-12dB
600Ω
Pilot Tone, Noise and Mute
US-8002D(DB)/US-8216D: 12-18 VDC, 200mA
US-8001D(DB): 12-18 VDC, 150mA
1 Balanced XLR socket
(2 for US-8002D(DB)/US-8216D)
1 Unbalanced Ø6.3mm phone jack
221mm (W)* 40mm (H)* 152mm (D)
Mh-750 / Mh-850
PLL Synthesized Control
502~960 MHz
10mW
±10KHz
±48KHz
Low Battery, Power On/Off
Power On/Off,
Channel Selecting
<-50 dBC
50~16,000 Hz
UM3, AA 1.5V*2
Mh-8016( i )
PLL Synthesized Control
502~960 MHz
10mW
±10KHz
±48KHz
Power On/Off,
Channel Up/Down
<-60 dBC
50~16,000 Hz
UM3, AA 1.5V*2
2