Operation - JTS R-4 Instruction Manual

6. Operation

6-1 Operation //
Parameter settings
Push and hold
the rotary switch to select the desired item. Push the rotary switch
(or SETUP) to enter the setting page. Spin the switch to select the
desired value or function. Push SETUP to save the settings. Push EXIT
to return to the previous page.
System Settings
◎Display
Contrast
Brightness
◎Antenna power supply
ON
OFF
◎Mixed output level
OFF(Line)
ON(Mic)
◎Reset to factory defaults
Push and hold SETUP for 2 seconds and the system is
reset to factory defaults and restarts.
◎Return
Return: push SETUP to return to the previous page.
29
/
SET for 2 seconds to enter the setting mode. Turn
'' ''
0~9 (default: 5)
0~9 (default: 5)
(DC12V/100mA is provided to) power
the external antenna booster.
Line output is selected for balanced
mixing output level.
Mic output is selected for balanced
mixing output level.