Specification; Handheld Transmitter - JTS E-7R Instruction Manual

3. Specification

3-1 Receiver
Model No .........................................
Frequency Preparation..............
Carrier Frequency Range.......
S/N Ratio...........................................
T.H.D.............................................
Display........................................
Display Contents...........................
Controls............................
Audio Output Level....................
AF Output Impedance..............
Squelch.............................
Operation Voltage.........................
Output Connector.......................
Dimension(m/m)...............

3-2 Handheld Transmitter

Model No............................................
Frequency Preparation...............
Carrier FrequencyRange..........
RF Outputs........................................
Stability..................................................
Frequency Deviaion....................
LED Display.......................................
Controls................................................
Spurious Emissions.......................
Audio Frequency Resonse.......
Battery.....................................................
E-7R / E-7Du
PLL Synthesized Control
470~960 MHz
> 100dB
<0.6%@1KHz
LED
RF/AF Status
Power On/Off, Channel Selecting, Audio Level
-15dB
600Ω
Pilot Tone, Noise and Mute
12 VDC, 150mA (E-7R)
12 VDC, 250mA (E-7Du)
1 Balanced Ø6.3mm phone jack
221mm (W)* 40mm (H)* 152mm (D)
E-7TH(D)
PLL Synthesized Control
470~960 MHz
10mW
±10KHz
±48KHz
Power On/Off, Low battery, mute
Power On/Off, Channel Selecting, mute
<-60 dBC
50~16,000 Hz
UM3, AA 1.5V*2
2