JTS R-4 Instruction Manual page 57

10. Light Time: the the backlight time
(1) Press ▲、▼ to select backlight time. Press SET to
enter into "Light Time" screen.
(2) Press ▲、▼ to select the backlight time; you can
select "closed", "5~30 seconds"(having 5 seconds
as the unit of change) or "constant light."
The longer the backlight time, the shorter the usage
time of the battery.
11.Digicode
Use ▲ or ▼ to move to
Push SET to enter the setting page.
Push ▲ to activate. The microphone will transmit
digital code signals.
Push ▼ to deactivate. The microphone will not
transmit digital code signals. The receiver will be
in mute status if receiver has this function
activated.
12. Reset
(1) Press ▲、▼ to select reset. Press SET to enter into
"Reset" screen.
(2) Press ▲to select confirm as to reset the internal
information of the handheld transmitter. Press SET to
save the setting.
(3) Press ▼to select cancel as to cancel the reset set-
ting. Press SET to save the setting.
53
DigiCode.
'' ''
Device ID
Remoset
RF Power
Contrast
Light Time
Light Time
10 Sec.
DigiCode
Reset
KeyLock
Exit
DigiCode
Reset
KeyLock
Exit
All stored
data will be
erased.
Yes / NO