JTS R-4 Instruction Manual page 28

5. Connection
5-1 Connecting the receiver
1.Connect the audio signal cable
Connect theR-4
Audio cable: one end of the XLR or φ6.3mm audio cable is connected
to the ''AF output balanced'' of
input of the mixer or amplifier.
2.Connect the power
Connect AC power cable: insert one end to the
the other to AC power outlet (100~240VAC).
Amplifier
圖 1
/ Raudio output to a mixer or an amplifier:
Step 2
AC power
cable
Wall socket
/ and the other to the audio
receiver 's AC jack and
Step 1
Audio output
24