Mitsubishi S4S Service Manual page 74

ENGINE MAIN PARTS
No. of bolts: 25
Cylinder head bolt tightening sequence (565)
(4) Reassembling rocker shafts
After reassembling the rocker shafts, make sure
the rocker arms move smoothly.
Reassembling rocker shafts
(a) Install the valve caps in position.
(5) Installing rocker shaft assembly
(b) Put the roeket shaft assembly on the cylinder
head and tighten the bolts to the specified
torque.
Long bolt
10.0 to 20.0 N·m
(1.0 to 2.0 kgf.m)
[7.23 to 14.5
IbHt]
Tightening torque for
rocker shaft bolts
r - - - - - - - - - j
NOTE
1 - - - - - - - - - ,
Installing rocker shaft assembly
Be sure to tighten the long bolt first.
(6) Adjusting valve clearance
Refer to 1.1, Group 5.
Adjusting valve clearance
7-12