Mitsubishi S4S Service Manual page 151

3. Glow Plugs
Inspeetion
If the glow plug glows red when the positive (+) wire
is connected to the portion A with the porti on B
grounded, the plug cao be used.
Rated
11 - 5.5 (DI) (30 sec. rating)
voltage -
12 V
current,
10.5 -9.7 (SC) (30 sec. rating)
V-A
DI - Direct injection SC - Swirl chamber
4. Stop Solenoid (Option)
Inspeetion
Energize the stop solenoid to m,make sure the stop
lever is in the "RUN" position. De-energize it to be
sure that the stop lever always in the "stop" position.
Item
Rated voltage V 12V
Rated temp.,
20°C [68°P]
°C rF]
ELECTRICAL SYSTEM
Inspecting glow plug
12-13