Mitsubishi S4S Service Manual page 59

(10) Fuel injection pump
(a) Remove oil pipe.
(b) Remove bolts that hold the gear case cover.
(c) Remove bolts that hold the flange plate.
Remove pump with gear and flange from the
front plate. (Some engines are not equipped
with pump bracket.)
(11) Oil cooler (engines with oil cooler)
Remove bolts that hold oil cooler cover to the
crankcase. Remove the cooler, complete with
the cover, from the crankcase. Remove gasket
and O-ring.
(12) Oil filter
(a) Remove oil filter with a filter wrench.
C 13) Altemator
Ca) Disconneet hamess from alternator. Remove
adjusting bolt.
(b) Remove bolts to remove the altemator.
Cc) Remove V-belt.
ENGINE AUXILIARIE8 REMOVAL AND IN8TALLATION
Fuel injection pump
Removing fuel injection pump
Removing oil cooler
üil filter
Removing oil filter
Removing alternator
6-5